I have a slight issue that I am unsure on how to approach in solving.
I posted just a little while ago regarding having purchased a new 12 x 12 machine with arduino and having just assembled it and everything. After assembly and installing the softwares and testing out the axis (Haven't gotten to the spindle yet), it all jotted around fine.
Usually, I understand, when the machine is just powered on, the 3 LED will come on along with some sound - I guess checking, preliminary steps. It would do this while blinking for about a minute before stopping.
Today, while I was working beside the CNC machine, while it was not in use I noticed the 3 LED began blinking by itself despite me not having disengaged the power supply etc. It kept blinking non stop for a good while so I pulled the plug on it and plugged it back in however that did not fix it as it just kept blinking.
This machine has not been in use yet except for some very early axis movement tests by hand jotting.
Does anyone know what this may be about? I also tried restarting my computer, unplugging the power supply than the usb than reverse plugging everything before booting my system up again but the non-stop blinking still persists?
Thanks, any help deeply appreciated...