Dog Cutout

Source files covering everything from cabinets in the kitchen to creepers in the garage (attachments of gcode, 3d models, or other related material).
Forum rules
Each topic should consist of 1 single project and should contain at the very least 3 items:
  1. Picture showing the completed project
  2. Description of what it is and/or does
  3. Downloadable GCode in common format as a downloadable file (these forums support file uploads for this)

Dog Cutout

Postby rawkstar320 » Sat Jan 26, 2013 10:49 am

Hey everyone, I wanted to share a dog cutout I did last weekend. I cut it out of 3/4" pine (I think it was 1" nominal thickness) then painted with some paint I got at walmart in the "Screwed Up" section. I didn't paint them elaborately because my wife needed to write body parts/axis labels on them for VetTec classes, but you could cut these out of thinner, nicer wood and have some really cool silhouette dogs!

A note on the G-Code file: The GCode file was generated for material 0.770" thick, using a 1/8" endmill. 12 in/min feedrate. The final dog is approximately 4" long.
(23.19 KiB) Downloaded 840 times
(154.35 KiB) Downloaded 870 times
Check out my Etsy store:

Interested in making your own machinable wax? Check out:
User avatar
Forum Resident
Posts: 306
Joined: Wed Oct 03, 2012 9:12 pm
Zen Model: Zen 0707
Other CNC Info: Zen 7x7 w Dremel 4000 and GRBL

Return to General Code Database