Boo... Pumpkin

Source files covering everything from cabinets in the kitchen to creepers in the garage (attachments of gcode, 3d models, or other related material).
Forum rules
Each topic should consist of 1 single project and should contain at the very least 3 items:
  1. Picture showing the completed project
  2. Description of what it is and/or does
  3. Downloadable GCode in common format as a downloadable file (these forums support file uploads for this)

Boo... Pumpkin

Postby Hawk » Fri Oct 19, 2012 8:56 pm

The codes here are generated for a blank piece of .75 stock (I used mdf) 6.5 x 8 incs.
0,0 is set in the center of the stock with 0Z set on the surface.

Ruffing pass is done with .25 endmill set at .125 pass depth at a feed rate of 50ipm (you made need to adjust for your machine.)
Finish pass is done with .125 ball nose mill at 40ipm
Pocket and profile are done with a .125 mill at 40imp

Enjoy.....
Attachments
Profile 1.txt
coutout
(66.02 KiB) Downloaded 408 times
Flatpocket.txt
Face
(123.82 KiB) Downloaded 396 times
3D Finish 2.txt
pumpkin
(1.22 MiB) Downloaded 386 times
3D Roughing 1.txt
pumpkin
(191.86 KiB) Downloaded 391 times
User avatar
Hawk
Forum Resident
 
Posts: 227
Joined: Sat Dec 04, 2010 1:20 pm

Return to General Code Database

cron

x