small replacment clamps for m6 bolts

Projects and Source files that are created to extend the Zen Toolworks DIY CNC machines.
Forum rules
Each topic should consist of 1 single project and should contain at the very least 3 items:
  1. Picture showing the completed project
  2. Description of what it is and/or does
  3. Downloadable GCode in common format as a downloadable file (these forums support file uploads for this)

small replacment clamps for m6 bolts

Postby doulos24 » Wed Feb 15, 2012 4:25 am

thought I would share these with the rest of you guys. I made a set of replacment setup clamps that are a lil smaller. Feel free to size this for your own use. The middle is cut for a m6 bolt and works well without to much sanding filing etc. and I made some steps for the stepping clamps. I hope this helps someone. Image ImageImage ImageImage
all the dxf and gcode files
(207.61 KiB) Downloaded 331 times
User avatar
Normal User
Posts: 13
Joined: Wed Jan 18, 2012 2:26 pm
Zen Model: Zen 0712 (Ext. Mod)

Re: small replacment clamps for m6 bolts

Postby skrubol » Wed Feb 15, 2012 6:07 pm

I like that design of having the screw between the stepped blocks. I'm always running up against the edge of the machine with stepped blocks and that would let me put them closer to the edge.
I may modify that and connect the tops of the 2 stepped blocks so you don't need to worry about 3 pieces.
User avatar
Forum Resident
Posts: 223
Joined: Wed Oct 26, 2011 10:40 am
Zen Model: Zen 0712 (Ext. Mod)

Re: small replacment clamps for m6 bolts

Postby Xin » Thu Feb 16, 2012 3:28 pm

Nice and thank you for sharing.
User avatar
Zen Toolworks Official
Posts: 269
Joined: Tue Jul 06, 2010 1:31 am
Location: Northen California, U.S.A.
Zen Model: More than one

Return to Zen Compatible Project Archive