Dremel 300 mount on Zen Toolworks

Projects and Source files that are created to extend the Zen Toolworks DIY CNC machines.
Forum rules
Each topic should consist of 1 single project and should contain at the very least 3 items:
  1. Picture showing the completed project
  2. Description of what it is and/or does
  3. Downloadable GCode in common format as a downloadable file (these forums support file uploads for this)

Dremel 300 mount on Zen Toolworks

Postby Zaphreux » Thu Sep 01, 2011 7:14 am

Hi all
First, sorry for my poor english.
I've bought an 0712 this summer and I want to install my Dremel 300 on it.
First version of this mount is running, by I'm currently make a new one.
First, the first version :
Image

This mount is in 3 parts, on back plane I'm currently making a new one, and 2 supports.
Currently Cambam GCode and DXF files are freely accessible on my site, on this post : http://www.cocquerez.com/post/2011/08/3 ... Dremel-300 for high support (the one on the picture) and for the backplane (New version, not tested, not on picture yet)

Drawing of hish support :
Image

I have to put the low support as soon as possible.

Material use for this mount is a very cheap cutting board from "ikea". It is made on High-density polyethylene (HDPE) and cost only 2 €

All explanations are on my site (in french, but google translate installed :-) )
All comments are also welcome

Here are links to files containing Cambam file and GGode.

Updated link to lowersupport : http://www.cocquerez.com/public/cnc/supportbas.zip

New version on back plane and lower support based on Zen toolswork PVC bloc to come for better strength

Upper Support files:
supportHaut.dxf
DXF Model
(4.79 KiB) Downloaded 370 times

supportHaut.ngc
GCode
(34.88 KiB) Downloaded 301 times

supportHaut.cb
Cambam Source
(2.13 KiB) Downloaded 305 times


Rear Plate files
base.ngc
GCode
(49.22 KiB) Downloaded 294 times

base.cb
Cambam Source
(42.43 KiB) Downloaded 273 times


Rear Plate files (new)
SupportArriere.ngc
GCode
(29.91 KiB) Downloaded 288 times

PlaqueArriere.cb
Cambam Source
(11.9 KiB) Downloaded 320 times
Last edited by Zaphreux on Wed Sep 07, 2011 3:12 am, edited 2 times in total.
Zaphreux, N'importe quoi, for ever
http://www.cocquerez.com
User avatar
Zaphreux
New User
 
Posts: 1
Joined: Thu Sep 01, 2011 6:52 am
Zen Model: Zen 0712 (Ext. Mod)

Re: Dremel 300 mount on Zen Toolworks

Postby calexander » Thu Sep 01, 2011 12:32 pm

Thanks for the project - it looks great!

These project archives require a downloadable GCode file and any CAD source files you had created so that others can load it up in their CNC programs.

Can you edit your post and include these at the bottom?
User avatar
calexander
Zen Toolworks Official
 
Posts: 489
Joined: Tue Jun 29, 2010 1:53 am
Location: Ephrata, Pennsylvania, USA
Zen Model: More than one
Other CNC Info: 0707 1212 3DP

Re: Dremel 300 mount on Zen Toolworks

Postby calexander » Thu Sep 01, 2011 4:04 pm

I got an error unzipping.
The "LowerSideDremel3000.zip" is corrupted.
User avatar
calexander
Zen Toolworks Official
 
Posts: 489
Joined: Tue Jun 29, 2010 1:53 am
Location: Ephrata, Pennsylvania, USA
Zen Model: More than one
Other CNC Info: 0707 1212 3DP


Return to Zen Compatible Project Archive

cron

x