First, sorry for my poor english.
I've bought an 0712 this summer and I want to install my Dremel 300 on it.
First version of this mount is running, by I'm currently make a new one.
First, the first version :
This mount is in 3 parts, on back plane I'm currently making a new one, and 2 supports.
Currently Cambam GCode and DXF files are freely accessible on my site, on this post : http://www.cocquerez.com/post/2011/08/3 ... Dremel-300 for high support (the one on the picture) and for the backplane (New version, not tested, not on picture yet)
Drawing of hish support :
I have to put the low support as soon as possible.
Material use for this mount is a very cheap cutting board from "ikea". It is made on High-density polyethylene (HDPE) and cost only 2 €
All explanations are on my site (in french, but google translate installed )
All comments are also welcome
Here are links to files containing Cambam file and GGode.
Updated link to lowersupport : http://www.cocquerez.com/public/cnc/supportbas.zip
New version on back plane and lower support based on Zen toolswork PVC bloc to come for better strength
Upper Support files:
Rear Plate files
Rear Plate files (new)