Extruder Setting in ZTW Marlin for K Type Therm w/AD595.

Here is a place we can talk about using ZTW CNC platform for 3D printing. Your experience with software setup, configuration for different type of filament and etc.

Extruder Setting in ZTW Marlin for K Type Therm w/AD595.

Postby ktech162 » Tue Dec 17, 2013 12:39 am

Hi, I got one of the Extruders with a K type thermocouple embedded in the head itself. I see where in other builds people set #define ThermistorHeater_0 -1 for this setup using an AD595 thermocouple conversion chip. I know it takes minor changes to the Sanguinololu Board but Marlin does not want to cooperate to let me get that far. It gives a table not defined error when trying to input a -1 for the thermocouple type. I see where Marlin has some stuff embedded in it for the ad595 but what do I set it to to use this capability? Does the ZTW Marlin 10-07-12 have this capability?
User avatar
ktech162
New User
 
Posts: 2
Joined: Tue Sep 17, 2013 5:22 am
Zen Model: Zen 0707

Return to 3D Printing with ZTW Filament and CNC

cron

x