12x7 controller + psu

You can post the images of your ZTW CNC setups, with a brief description.

12x7 controller + psu

Postby lennym » Fri Dec 07, 2012 2:05 am

Just to give something small back to the community - here is a picture of my 7x12 wiring setup.
I'm using ztw tb6560 controllers, ztw recommended 36v psu, arduino with grbl and still considering getting a separate psu for the steppers (meanwhile using my atx desktop psu).

I've got this 6.99$ fabian shelf from ikea, http://www.ikea.com/us/en/catalog/products/46693309/, cut it in length to 19 3/16 , and layed out the components so that when i am ready to move forward to the next step (3d printing) , i will have just the space for an extra psu and a sanguinololu.

For fastening, I've found it useful to use this spiral cable wrap from amazon:
http://www.amazon.com/gp/product/B003PP ... 05_s00_i00 (~9$ for 33 feet)

and cable holders from ace. (3$)

Hope this helps someone.

Best wishes, happy milling...
Lenny
Attachments
cnc_setup.jpg
User avatar
lennym
Normal User
 
Posts: 10
Joined: Sat Dec 01, 2012 11:45 am
Zen Model: Zen 0712 (Ext. Mod)

Re: 12x7 controller + psu

Postby sberfield » Wed Oct 16, 2013 12:52 am

Nice and neat. Thanks for sharing. I wish I had used the spiral wire wraps. I used some spilt tube stuff from Home Depot that was a pain to get the wires through. I see you mounted your Y stepper at the back. I hadn't though of doing so. May have to think about it now.
User avatar
sberfield
Normal User
 
Posts: 10
Joined: Thu Oct 03, 2013 4:45 am
Zen Model: Zen 0712 (Ext. Mod)


Return to Customer Images

cron

x