7x7 M6x20 has no threads on it

Shared stories of success and failures from the novice to the professional.

7x7 M6x20 has no threads on it

Postby da3v » Fri Dec 30, 2011 10:05 pm

How do I get a replacement from you quickly, or should I take it up with Amazon?
User avatar
da3v
Normal User
 
Posts: 5
Joined: Mon Sep 05, 2011 11:59 am
Zen Model: None or Other

Re: 7x7 M6x20 has no threads on it

Postby da3v » Fri Dec 30, 2011 10:14 pm

User avatar
da3v
Normal User
 
Posts: 5
Joined: Mon Sep 05, 2011 11:59 am
Zen Model: None or Other

Re: 7x7 M6x20 has no threads on it

Postby roller » Sat Dec 31, 2011 12:15 am

I'd drop an email to Xin at Zentoolworks directly. He watches the forums but it depends how busy he is. An easy way to contact him directly is here:

http://www.zentoolworks.com/contact_us.php
User avatar
roller
Forum Moderator
 
Posts: 474
Joined: Wed Jan 26, 2011 8:54 pm
Location: Brisbane, Australia
Zen Model: Zen 0712 (Ext. Mod)

Re: 7x7 M6x20 has no threads on it

Postby calexander » Sun Jan 01, 2012 8:53 pm

That's quite interesting. I've never seen anything like that before. I think contact has been made already and its being worked out.
User avatar
calexander
Zen Toolworks Official
 
Posts: 489
Joined: Tue Jun 29, 2010 1:53 am
Location: Ephrata, Pennsylvania, USA
Zen Model: More than one
Other CNC Info: 0707 1212 3DP

Re: 7x7 M6x20 has no threads on it

Postby jscook55 » Sun Jan 01, 2012 10:39 pm

Seriously, I've worked as an engineer in manufacturing for 7 years now, and I've never seen that! Maybe it's good luck!
My site about DIY camera mounts: http://www.diytripods.com/ Twitter: https://twitter.com/JeremySCook
User avatar
jscook55
Forum Resident
 
Posts: 240
Joined: Fri Jun 10, 2011 5:44 pm
Zen Model: Zen 0712 (Ext. Mod)

Re: 7x7 M6x20 has no threads on it

Postby roller » Sun Jan 01, 2012 10:46 pm

I have seen it a few times. It happens. I have had it from some hardware store bolts and in a Tamiya remote control car kit waaay back in the 90s. It was annoying then because I couldn't readily find replacements.
User avatar
roller
Forum Moderator
 
Posts: 474
Joined: Wed Jan 26, 2011 8:54 pm
Location: Brisbane, Australia
Zen Model: Zen 0712 (Ext. Mod)

Re: 7x7 M6x20 has no threads on it

Postby hypeboy » Thu Mar 08, 2012 3:45 am

I'd drop an email to Xin at Zentoolworks directly. He watches the forums but it depends how busy he is. An easy way to contact him directly is here:

http://www.zentoolworks.com/Cadillac Parts


this is effective my friend did this already. anyway what's that I haven't seen that anywhere....
User avatar
hypeboy
Normal User
 
Posts: 3
Joined: Fri Jul 22, 2011 4:09 am
Zen Model: Zen 1212


Return to Stories of Success & Failure

x