Zen Enclosure

Shared stories of success and failures from the novice to the professional.

Zen Enclosure

Postby Crazyju » Mon Jan 30, 2012 9:43 am

I finally quit cutting stuff long enough to enclose the machine. I used 1/2 mdf and a sheet of lexan. I need to add a light. It cut down on the noise a lot and seems to contain most of the dust.

Image
User avatar
Crazyju
Normal User
 
Posts: 66
Joined: Tue Dec 13, 2011 9:38 am
Zen Model: Zen 1212
Other CNC Info: Fast 8s on the way

Re: Zen Enclosure

Postby ShreddinPB » Thu May 03, 2012 1:54 pm

Do you worry about chip/dust buildup? Or do you just vacuum the whole thing at once after your part is made?
User avatar
ShreddinPB
Normal User
 
Posts: 30
Joined: Sat Mar 12, 2011 7:09 pm
Zen Model: Zen 1212
Other CNC Info: proxon mf70

Re: Zen Enclosure

Postby rawkstar320 » Wed Nov 07, 2012 5:23 pm

Very cool, I am planning on building one this weekend - but i am hoping I can make it a little smaller.
Check out my Etsy store: http://www.etsy.com/shop/WondrousWidgets

Interested in making your own machinable wax? Check out: http://www.instructables.com/id/Machinable-Wax/
User avatar
rawkstar320
Forum Resident
 
Posts: 306
Joined: Wed Oct 03, 2012 9:12 pm
Zen Model: Zen 0707
Other CNC Info: Zen 7x7 w Dremel 4000 and GRBL

Re: Zen Enclosure

Postby roller » Thu Nov 08, 2012 5:56 am

I believe what you have there is a Zenclosure :)
User avatar
roller
Forum Moderator
 
Posts: 474
Joined: Wed Jan 26, 2011 8:54 pm
Location: Brisbane, Australia
Zen Model: Zen 0712 (Ext. Mod)


Return to Stories of Success & Failure

cron

x