New Shop Vac Muffler - Cheapest yet (uses ZTW foam cutter!)

Shared stories of success and failures from the novice to the professional.

New Shop Vac Muffler - Cheapest yet (uses ZTW foam cutter!)

Postby jscook55 » Tue May 15, 2012 8:30 pm

So here's yet another muffler I made for my Shop Vac: http://www.jcopro.net/2012/05/15/simplest-shop-vac-muffler-yet/. This time it's really cheap using scrap Styrofoam, an old towel and an adapter - the adapter was the only thing I had to buy unless you count the duct tape.

Image

Image

Took a video of it (in the post). Reduces noise around 3 decibels. Not bad for the price :D, and a great use for the ZTW foam cutter!
My site about DIY camera mounts: http://www.diytripods.com/ Twitter: https://twitter.com/JeremySCook
User avatar
jscook55
Forum Resident
 
Posts: 240
Joined: Fri Jun 10, 2011 5:44 pm
Zen Model: Zen 0712 (Ext. Mod)

Return to Stories of Success & Failure

x