Using a TB6560 with another daq

Shared stories of success and failures from the novice to the professional.

Using a TB6560 with another daq

Postby IgnacioAC » Wed Sep 05, 2012 9:31 pm

Hi,
I bought like a year ago the 7x7 cnc kit, recently I buy the TB6560 motor interface, well I am try to conect with the My Daq from Lab view card, but I can find any information about how the TB6560 work, in the wiki of zentool i found this form of conection http://wiki.zentoolworks.com/index.php/ ... e_relay%29, but I need to know how they works, for example What is mean PUL, EN and DIR. I suppose that:
PUL is the pulse of a signal.
EN is the enable for the motor.
DIR is the direction of the motor.

Please someone can help me.
Ignacio
User avatar
IgnacioAC
Normal User
 
Posts: 4
Joined: Wed Aug 22, 2012 5:23 pm
Zen Model: Zen 0707

Re: Using a TB6560 with another daq

Postby IgnacioAC » Sun Sep 09, 2012 9:56 pm

Hi, thank for answer too quickly, now I know how it's working the tb6560 and I can program with the Mydaq system.
User avatar
IgnacioAC
Normal User
 
Posts: 4
Joined: Wed Aug 22, 2012 5:23 pm
Zen Model: Zen 0707

Re: Using a TB6560 with another daq

Postby juliansamangun » Wed Mar 20, 2013 11:55 pm

Hi, I am trying to connect tb6560 to my labview system. Could you please show me how you did. Thanks.
User avatar
juliansamangun
New User
 
Posts: 1
Joined: Wed Mar 20, 2013 11:53 pm
Zen Model: None or Other

Re: Using a TB6560 with another daq

Postby IgnacioAC » Fri Mar 22, 2013 11:53 am

At the end of the proyect we just send 1 or 0 from my daq and made proves to funcion the proyect, at the pulse of the TB6560 we used a 555 to make the pulse, this is to make more quickly the motor and send the dir + or - and the enable pulse.
Ignacio
User avatar
IgnacioAC
Normal User
 
Posts: 4
Joined: Wed Aug 22, 2012 5:23 pm
Zen Model: Zen 0707


Return to Stories of Success & Failure

cron

x