5X Mach3 Control Enclosure

You can post the images of your ZTW CNC setups, with a brief description.

5X Mach3 Control Enclosure

Postby bjmxr88 » Thu May 15, 2014 4:57 pm

Decided to make a neat enclosure for the Mach3 5 Axis Breakout Board and drivers. The enclosure has spots for all 5 driver boards, but my current setup only needs 4. All the ports are accessible as well as a built in fan to exhaust any heat from inside the enclosure. This was all done on a 60W Laser Cutter from Acrylic Plastic. Very happy with the results and it should keep things clean and safe.
20140515_114939.jpg

20140515_114944.jpg
User avatar
bjmxr88
Normal User
 
Posts: 74
Joined: Sat Jan 07, 2012 3:00 am
Zen Model: None or Other

Re: 5X Mach3 Control Enclosure

Postby bjmxr88 » Thu May 15, 2014 4:59 pm

20140515_115104.jpg

20140515_115118.jpg
User avatar
bjmxr88
Normal User
 
Posts: 74
Joined: Sat Jan 07, 2012 3:00 am
Zen Model: None or Other

Re: 5X Mach3 Control Enclosure

Postby Alchemist » Sat Aug 23, 2014 6:50 pm

Great job ! I used an old Xbox console for mine.
User avatar
Alchemist
Normal User
 
Posts: 11
Joined: Fri Oct 12, 2012 12:30 pm
Zen Model: Zen 1212

Re: 5X Mach3 Control Enclosure

Postby johntech » Thu Sep 25, 2014 9:44 am

That looks really good. I need to make something for my old original controller and power supply along with the few other upgrades I added

John
User avatar
johntech
Forum Moderator
 
Posts: 422
Joined: Tue Mar 22, 2011 7:09 pm
Zen Model: Zen 1212


Return to Customer Images

cron

x